In the construction process of epoxy floor paint, the first thing to apply protective agent is to prevent the evaporation of surface moisture, to ensure the stability of wear resistance, and to cast concrete in different zones on the ground. Pay attention to the construction sequence from one direction, and consider the similarity of the contact surface; use mechanical trowel belt round beating pulp, fine edge closure with trowel knife, the first thing is to calm the surface of concrete and reduce the floating pulp, pay attention to the same direction of casting trowel. The hardening agent wear-resisting material with 2/3 unit dosage is evenly distributed on the cement floor which has been cured. Due to the messy site conditions, after all the civil construction and equipment are finished, it is found that the damaged areas can be easily repaired directly with wear-resisting materials and adhesives. Maybe the color is slightly different, but it does not affect the integrity. 環氧地坪漆用機械鏝(金屬圓盤)來回多次鏝光，纖細邊角處用手工鏝刀協作施工，視溫度、濕度斷定下一道工序時間；剩余1/3單位用量的硬化劑耐磨材料均勻的撒布在混凝土的外表，用加裝圓盤的機械鏝縱橫交錯的作業，至少在二編以上;環氧地坪的外表初步硬化時。
Epoxy floor paint uses mechanical trowels (metal discs) to and fro for many times, and manual trowels to construct thin edges and corners to determine the next process time according to temperature and humidity. The remaining 1/3 unit of hardener wear-resistant materials are evenly distributed on the surface of concrete, and mechanical trowels with discs are used for crisscross-cutting operations, at least in the second part; the surface of the floor is initially hardened.
The mechanical trowel with metal blades is used for polishing and calendering and repeated operation for 3 to 4 times; the constructors must wear soft flat shoes to prevent damage to the appearance) and hand calender the thin edges and corners; this is very important, generally the floor will do, and do the same, that is, the late operation is not done well directly resulting in the quality of the floor, the protection time is 7 days.辛苦整理.轉載請注明：http://www.x0m5.com